Compact De-Dusters Using Spun-Bond Pleated Filter Media:

Capable of handling up to 10 gm/Nm3 dust loads with guaranteed emission level of even less than 10 mg/Nm3, this bag filter is capable of handling very fine dust at low pressure. This bag filter is also capable of handling dusts with very low material density up to 100 kg/m3. 
Features:
  • Very compact, with filter length of 500 mm & 1000 mm.
  • Available in 500 m3/h, 1000 m3/h, 2000 m3/h, 5000 m3/h and 10,000 m3/h with inbuilt fan capable of inducing (-) 200 mmwc pressure at bag filter inlet.
  • In-built silencer for < 80 dBA sound pressure.
  • Up to 1000 liter capacity dust holding bin.
  • Temperature rating up to 135 0C.
  • Filter life span of over 5 years even with abrasive dusts.
  • Uses injector nozzle pulsing for most efficient online cleaning of filter, eliminates energy sapping conventional venturi and requires minimum pulsing at large intervals saving on compressed air energy.
  • Laser cut bag holding plates and easy to install snap-fit filters ensure zero leakage, critical to emission control.
  • Cage-less design. Fully molded stiff single piece filter construction for easy handling & fitment.
  • Available with filter media selection of spun-bond Polyester/Acrylic with surface treatments of oil/water repellant, anti-static, spark resistant, flame retardant, PTFE membranes etc to suit varied applications.

Silo Vent Filters:

Capable of handling up to 100 gm/Nm3 dust loads with guaranteed emission level of even less than 10 mg/Nm3, this bag filter is capable of handling very fine dust at low pressure. This bag filter is also capable of handling dusts with very low material density up to 100 kg/m3. These are flush mounted on top of silo/bin to vent pneumatic transport air or to keep the silo/bin under negative pressure to prevent dust escape while silo/bin is being mechanically filled. 
Features:
  • Very compact, with filter length of 1000 mm & 2000 mm.
  • Available in 2000 m3/h, 5000 m3/h, 10,000 m3/h, 15,000 m3/h & 20,000 m3/h with or without inbuilt fan.
  • Temperature rating up to 135 0C.
  • Filter life span of over 5 years even with abrasive dusts.
  • Uses injector nozzle pulsing for most efficient online cleaning of filter, eliminates energy sapping conventional venturi and requires minimum pulsing at large intervals saving on compressed air energy.
  • Laser cut bag holding plates and easy to install snap-fit filters ensure zero leakage, critical to emission control.
  • Cage-less design. Fully moulded stiff single piece filter construction for easy handling & fitment.
  • Available with filter media selection of spun-bond Polyester/Acrylic with surface treatments of oil/water repellant, anti-static, spark resistant, flame retardant, PTFE membranes etc to suit varied applications.